No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009 CLI-based Configuration Guide - Ethernet Switching

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Licensing Requirements and Limitations for VLAN Aggregation

Licensing Requirements and Limitations for VLAN Aggregation

Involved Network Elements


Licensing Requirements

VLAN aggregation is a basic feature of a router and is not under license control.

Feature Limitations

When deploying VLAN aggregation on the router, pay attention to the following:

  • VLAN 1 cannot be configured as a super-VLAN.
  • A physical interface cannot be added to a VLAN configured as a super-VLAN.
  • A traffic policy takes effect in a super-VLAN only after the traffic policy is configured in all sub-VLANs of the super-VLAN.
  • The VLAN terminated by a sub-interface cannot be configured as a super-VLAN or sub-VLANs.
  • An IP address must have been assigned to the VLANIF interface corresponding to the super-VLAN. Otherwise, proxy ARP cannot take effect.
Updated: 2019-05-17

Document ID: EDOC1000174108

Views: 56068

Downloads: 41

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next