No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009 CLI-based Configuration Guide - Ethernet Switching

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default Settings for Transparent Bridging

Default Settings for Transparent Bridging

This section provides default parameter settings of transparent bridging.

Table 15-3  Default setting for transparent bridging

Parameter

Default Setting

Bridging function for a specified network protocol

Enabled for all protocols

Routing function

Disabled for IP protocol packets

Transparent transmission of VLAN IDs

Disabled

Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000174108

Views: 55040

Downloads: 40

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next