No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009 CLI-based Configuration Guide - Ethernet Switching

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Intra-VLAN Layer 2 Isolation

Intra-VLAN Layer 2 Isolation

You can add different users to different VLANs to implement Layer 2 isolation between users. If an enterprise has many users, VLANs have to be allocated to all users that are not allowed to communicate with each other. This user isolation method uses a large number of VLANs and makes configuration more complex, increasing the maintenance workload of the network administrator.

Huawei provides intra-VLAN Layer 2 isolation technologies including port isolation, MUX VLAN, and Modular QoS Command-Line Interface (MQC).

Port Isolation

Port isolation can isolate interfaces in a VLAN. You can add interfaces to a port isolation group to disable Layer 2 packet transmission between the interfaces. Interfaces in different port isolation groups or out of port isolation groups can exchange packets with other interfaces. In addition, interfaces can be isolated unidirectionally, providing more secure and flexible networking.

For details about port isolation, see Configuring Interface Isolation in Huawei AR Series Access Routers Configuration Guide - Interface Management.

MUX VLAN

Multiplex VLAN (MUX VLAN) provides a mechanism to control network resources using VLANs. It can implement inter-VLAN communication and intra-VLAN isolation.

For example, an enterprise has the following requirements:
  • Employees can communicate with each other but customers are isolated.
  • Both employees and customers can access enterprise servers.

You can deploy the MUX VLAN to meet the preceding requirements.

For details about the MUX VLAN feature, see MUX VLAN Configuration.

Intra-VLAN Layer 2 Isolation Based on the Traffic Policy

A traffic policy is configured by binding traffic classifiers to traffic behaviors. You can define traffic classifiers on a device to match packets with certain characteristics and associate the traffic classifiers with the permit or deny behavior in a traffic policy. The device then permits or denies packets matching the traffic classifiers. In this way, intra-VLAN unidirectional or bidirectional isolation is implemented based on the traffic policy.

The device supports intra-VLAN Layer 2 isolation based on MQC and simplified ACL-based traffic policies. For details about MQC and simplified ACL-based traffic policies, see MQC Configuration and ACL-based Simplified Traffic Policy Configuration in Huawei AR Series Access Routers Configuration Guide - QoS.

Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000174108

Views: 55141

Downloads: 40

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next