No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009 CLI-based Configuration Guide - Ethernet Switching

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Auto Mode of Adding a Port to the Voice VLAN

Configuring the Auto Mode of Adding a Port to the Voice VLAN

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run interface interface-type interface-number

    The interface view is displayed.

  3. Run voice-vlan mode auto

    The mode in which ports are added to a voice VLAN is set to auto.

    By default, ports are automatically added to a voice VLAN.

    NOTE:
    Access ports cannot be automatically added to a voice VLAN. To add an access port to a voice VLAN, run the port link-type command to change the link type to trunk or hybrid.

Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000174108

Views: 55367

Downloads: 40

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next