Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring RMON
RMON collects traffic statistics and monitors network status on the specified network segment.
Pre-configuration Tasks
Before configuring RMON, complete the following tasks:
- Configure Ethernet interface parameters.
- Configure basic SNMP functions.
Configuration Process
The RMON statistics function and RMON alarm function can be configured in any sequence. However, if the alarm variables configured in RMON alarm function are MIB variables defined in the statistics group or history group, the Ethernet statistics function or history statistics function must be configured on the monitored Ethernet interface first. Otherwise, alarm entries cannot be created.
