Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Licensing Requirements and Limitations for LSDP
This section provides the points of attention when configuring LSDP.
Involved Network Elements
None
Licensing Requirements
LSDP is a basic feature of a router and is not under license control.
Feature Limitations
LSDP is supported by only Layer 3 Ethernet interfaces.
An AR3260-S has active/standby MPUs installed. An active/standby switchover between the MPUs will also cause the interface status to alternate between Down and Up. It is difficult to determine whether the interface status change is caused by MPU switchover or LSDP. Therefore, you are not advised to configure LSDP on an AR3260-S.