Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring the Function of Aggregating Site Visitor Traffic on an Interface
Context
You can enable the function of aggregating site visitor traffic on an interface and report uplink and downlink data on the interface to the Agile Controller.
Procedure
- Run system-view
The system view is displayed.
- Run interface interface-type interface-number
The interface view is displayed.
- Run ip netstream aggregation enable
The function of aggregating site visitor traffic is enabled on an interface.
By default, the function of aggregating site visitor traffic is disabled on an interface.
