- About This Document
SNMP Configuration
- Overview of SNMP
Understanding SNMP
- Application Scenarios for SNMP
- Licensing Requirements and Limitations for SNMP
- Summary of SNMP Configuration Tasks
- Default Settings for SNMP
Configuring a Device to Communicate with an NMS by Running SNMPv1
Configuring a Device to Communicate with an NMS by Running SNMPv2c
Configuring a Device to Communicate with an NMS by Running SNMPv3
- Checking SNMP Packet Statistics
Configuration Examples for SNMP
Troubleshooting SNMP
RMON and RMON2 Configuration
TCP FPM Configuration
IP FPM Configuration
CWMP Configuration
LLDP Configuration
- Overview of LLDP
Understanding LLDP
- Licensing Requirements and Limitations for LLDP
- Default Settings for LLDP
Configuring Basic LLDP Functions
- Enabling LLDP
- (Optional) Disabling LLDP on an Interface
- (Optional) Configuring an LLDP Management IP Address
- (Optional) Configuring LLDP Time Parameters
- (Optional) Configuring the Interface Initialization Delay
- (Optional) Configuring the Type of TLVs that an Interface Can Send
- (Optional) Configuring LLDP Packet Authentication on an Interface
- Verifying the Configuration
Configuring the LLDP Alarm Function
Maintaining LLDP
Configuration Examples for LLDP
FAQ About LLDP
NQA Configuration
- Overview of NQA
- Understanding NQA
Test Mechanisms
- NQA Association Mechanism
- Application Scenarios for NQA
- Summary of NQA Configuration Tasks
- Licensing Requirements and Limitations for NQA
- Configuring the Response to UDP Tests Initiated by a Third-party Device or NMS Software
Configuring an NQA Test Instance
- Configuring a DHCP Test Instance
- Configuring a DNS Test Instance
- Configuring an FTP Download Test Instance
- Configuring an FTP Upload Test Instance
- Configuring an HTTP Test Instance
- Configuring an ICMP Test Instance
- Configuring an ICMP Jitter Test Instance
- Configuring an SNMP Query Test Instance
- Configuring a TCP Test Instance
- Configuring a Trace Test Instance
- Configuring a UDP Test Instance
- Configuring a UDP Jitter Test Instance
- Configuring a Hardware-based UDP Jitter Test Instance
- Configuring the LSP Ping Test
- Configuring the LSP Trace Test
- Verifying the Configuration
Configuring the NQA Transmission Delay Threshold and Alarm Threshold
Configuring the Trap Function
- Enabling the NQA Alarm Function
- Configuring the NQA Client to Send Traps When a Test Fails
- Configuring the NQA Client to Send Traps When a Probe Fails
- Configuring Trap Sending Upon Probe Result Changes
- Configuring the NQA Client to Send Traps After a Probe Succeeds
- Configuring the NQA Client to Send Traps When the Transmission Delay Exceeds the Threshold
- Verifying the Configuration
Configuring the NQA Client to Send Test Results to an FTP Server
- Configuring Parameters for Connecting to an FTP Server
- Enabling the Function of Saving NQA Test Results Through FTP
- (Optional) Configuring File Parameters for Saving Test Results Through FTP
- (Optional) Enabling the NQA Client to Send Traps to the NMS After Test Results Are Sent to the FTP
- Verifying the Configuration
Scheduling an NQA Test Instance
- Clearing NQA Test Statistics
Configuration Examples for NQA
- Example for Configuring a DHCP Test Instance
- Example for Configuring a DNS Test Instance
- Example for Configuring an FTP Download Test Instance
- Example for Configuring an FTP Upload Test Instance
- Example for Configuring an HTTP Test Instance
- Example for Configuring an ICMP Test Instance
- Example for Configuring an ICMP Jitter Test
- Example for Configuring an SNMP Query Test Instance
- Example for Configuring a TCP Test Instance
- Example for Configuring a Trace Test Instance
- Example for Configuring a UDP Test Instance
- Example for Configuring a UDP Jitter Test Instance
- Example for Configuring NQA to Check VoIP Service Jitter
- Example for Configuring a Threshold for the NQA Alarm
- Example for Sending Trap Massages to the NMS When the Threshold Is Exceeded
- Example for Configuring Test Results to Be Sent to the FTP Server
- Example for Configuring the LSP Ping Test for a Common Tunnel
- Example for Configuring the LSP Trace Test for the TE Tunnel
- Example for Configuring the LSP Trace Test for Checking the CR-LSP Hotstandby Tunnel
Troubleshooting NQA
FAQ About NQA
LSDP Configuration
Service Diagnosis Configuration
Mirroring Configuration
Packet Capture Configuration
NetStream Configuration
- Overview of NetStream
Understanding NetStream
- Application Scenarios for NetStream
- Licensing Requirements and Limitations for NetStream
- Default Settings for NetStream
Configuring Exporting of IPv4 Unicast Original Flow Statistics
Configuring IPv4 Multicast Original Flow Statistics Exporting
Configuring IPv4 Aggregation Flow Statistics Exporting
Configuring IPv4 Flexible Flow Statistics Exporting
Configuring Exporting of Statistics about Flows That Fail the RPF Check
- Configuring NetStream Interface Index Length
- (Optional) Configuring the Function of Aggregating Site Visitor Traffic on an Interface
- Clearing NetStream Statistics
Configuration Examples for NetStream
IP Accounting Configuration
TWAMP Light Configuration