No relevant resource is found in the selected language.
Your browser version is too early. Some functions of the website may be unavailable. To obtain better user experience, upgrade the browser to the latest version.
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Configuration
Verifying the Configuration
Prerequisites
The configurations of basic SNMPv1 functions are complete.
Procedure
Run the display snmp-agent community{ read | write } command to check community names.
Run the display snmp-agent sys-infoversion command to check the enabled SNMP version.
Run the display aclacl-number command to check ACL rules.
Run the display snmp-agent mib-view command to check MIB views.
Run the display snmp-agent sys-infocontact command to check the administrator's contact information.
Run the display snmp-agent sys-infolocation command to check the location of the router.
Run the display current-configuration | includetrap command to check the configuration of the trap function.
Run the display snmp-agent trap all command to check current and default status of all traps of all features.
Run the display snmp-agent trap-source command to check the source interface for sending traps.
Run the display snmp-agent target-host command to check information about the target host.
Run the display snmp-agent extend error-code status command to check whether the device is enabled to send extended error codes to the NMS.