Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default Settings for IP FPM
Table 4-2 lists default settings in IP FPM.
Table 4-2 Default settings for IP FPM
Parameter |
Default Setting |
|---|---|
On-demand two-way delay measurement for an IP FPM instance |
Disabled |
Measurement interval for an IP FPM instance |
10 seconds |
IP FPM instance |
Not created |
On-demand packet loss measurement interval |
10 minutes |
on-demand two-way delay measurement interval |
10 minutes |
On-demand packet loss measurement for an IP FPM instance |
Disabled |
Global Data Collecting Point (DCP) and Measurement Control Point (MCP) functions |
Disabled |
UDP port for an MCP to communicate with a DCP in IP FPM statistical system. |
65030 |
Alarm function of the IP FPM module |
Closed |
Measurement point of an IP FPM instance |
Not configured |
Alarm description |
Empty |