No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - QoS

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Bandwidth Management

Configuring Bandwidth Management

This section describes how to configure bandwidth management.

Context

After bandwidth management is configured, the device controls the bandwidth of packets matching conditions to manage network traffic.

Procedure

  • Configure bandwidth guarantee.
    1. Run system-view

      The system view is displayed.

    2. Run web

      The web view is displayed.

    3. (Optional) Run user-set user-set-name

      A web user group is created and the web user group view is displayed, or the view of an existing web user group is displayed.

      By default, the device contains two web user groups named VIP and Default.

    4. (Optional) Run user-ip from ip_addr1 to ip_addr2 [ description description ]

      An IP address segment is configured for users in a web user group.

      By default, no IP network segment is configured for users in a web user group.

    5. Run bandguarantee interface { interface-type interface-number | interface-name } type { ip ip-address | user-set user-set-name } cir cir-value [ time-range time-range-name ] [ description desctiption ]

      User bandwidth guarantee is configured.

      By default, user bandwidth guarantee is not configured.

    6. Run quit

      Exit from the web view.

    7. Run quit

      Exit from the system view.

  • Configure bandwidth limiting.
    1. Run system-view

      The system view is displayed.

    2. Run web

      The web view is displayed.

    3. (Optional) Run user-set user-set-name

      A web user group is created and the web user group view is displayed, or the view of an existing web user group is displayed.

      By default, the device contains two web user groups named VIP and Default.

    4. (Optional) Run user-ip from ip_addr1 to ip_addr2 [ description description ]

      An IP address segment is configured for users in a web user group.

      By default, no IP network segment is configured for users in a web user group.

    5. Run bandlimit interface { interface-type interface-number | interface-name } type { ip ip-address { { inbound cir in-cir-value | outbound cir out-cir-value } * } | user-set user-set-name { { inbound cir in-cir-value | outbound cir out-cir-value } * [ share ] } } [ time-range time-range-name ] [ description desctiption ]

      User bandwidth limiting is configured.

      By default, user bandwidth limiting is not configured.

    6. Run quit

      Exit from the web view.

    7. Run quit

      Exit from the system view.

Follow-up Procedure

  • Run the disable bandguarantee interface { interface-type interface-number | interface-name } type { ip ip-address | user-set user-set-name } cir cir-value [ time-range time-range-name ] [ description desctiption ] command to disable user bandwidth guarantee.

  • Run the disable bandlimit interface { interface-type interface-number | interface-name } type { ip ip-address [ { inbound cir in-cir-value | outbound cir out-cir-value } * ] | user-set user-set-name [ { inbound cir in-cir-value | outbound cir out-cir-value } * [ share ] ] } [ time-range time-range-name ] [ description desctiption ] command to disable user bandwidth limiting.

Verifying the Configuration

Run the display current-configuration command to check the parameter settings that have taken effect on the device.

Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000174115

Views: 40127

Downloads: 28

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next