No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - QoS

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Priority Mapping

Configuring Priority Mapping

Pre-configuration Tasks

After priority mapping is configured, the device determines the queues for inbound packets and priorities of outbound packets based on packet priorities or interface priorities. By doing this, the device provides differentiated services.

Before configuring priority mapping, configure link layer attributes of interfaces to ensure that the interfaces work properly.

Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000174115

Views: 41725

Downloads: 30

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next