No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - QoS

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Application Control Management

Configuring Application Control Management

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run web

    The web view is displayed.

  3. Run user-set user-set-name

    A web user group is created and the web user group view is displayed, or the view of an existing web user group is displayed.

    By default, the device contains two web user groups named VIP and Default.

  4. Run quit

    Return to the web view.

  5. Run app-profile app-profile-name

    An application control profile is created.

    By default, the name of an application control profile is not configured.

  6. Run category category-name

    The type of application protocols is configured.

    By default, application protocol types are not added to the SA signature file.

    To use application control management, ensure that deep security defense has been enabled and the SA signature file has been loaded.

  7. Run application application-name

    The name of an application protocol is configured.

    By default, application protocol names are not added to the SA signature file.

    To use application control management, ensure that deep security defense has been enabled and the SA signature file has been loaded.

  8. Run quit

    Return to the web view.

  9. Run application-control user-set user-set-name app-profile app-profile-name type { cir cir-value | application-deny } [ time-range time-range-name ] [ description description-text ]

    Application control management is configured for a user group.

    By default, application control management is not configured for a user group.

Translation
Download
Updated: 2019-12-27

Document ID: EDOC1000174115

Views: 45287

Downloads: 34

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next