No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - QoS

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling Deep Security Defense and Loading a Signature File

Enabling Deep Security Defense and Loading a Signature File

Context

To use the application control management function, run the engine enable command to enable deep security defense.

After enabling deep security defense, run the update restore sdb-default command to upload the SA signature file if application control management is used for the first time.

The SA signature file can be loaded only when the available memory space is larger than the signature file size.

Procedure

  1. Run engine enable

    Deep security defense is enabled.

    NOTE:

    After running the engine enable command, you can run the display sa information command to view the SA status. If the SA status is enabled, deep security defense is enabled successfully.

  2. Run update restore sdb-default

    The SA signature file is restored to the factory default version.

Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000174115

Views: 39434

Downloads: 28

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next