No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - QoS

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Congestion Avoidance

Configuring Congestion Avoidance

Pre-configuration Tasks

After congestion avoidance is configured, the device discards excess packets based on the configured drop profile to adjust the network traffic and solve the network overload problem.

Before configuring congestion avoidance, complete the following tasks:
  • Configure priority mapping.

  • Configure priority re-marking based on traffic classifiers.

  • Configure congestion management.

Configuration Procedure

Queue-based and class-based congestion avoidance cannot be configured simultaneously.

Updated: 2019-05-17

Document ID: EDOC1000174115

Views: 42140

Downloads: 30

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next