No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - QoS

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Congestion Management

Configuring Congestion Management

Pre-configuration Tasks

When congestion occurs on a network, the device enabled with congestion management determines the packet forwarding sequence based on the configured scheduling policy to ensure that high-priority services are sent preferentially.

Before configuring congestion management, complete the following tasks:
  • Configure priority mapping.

  • Configure priority re-marking based on traffic classifiers.

Configuration Procedure

Queue-based and class-based congestion management cannot be configured simultaneously.

Translation
Download
Updated: 2019-12-27

Document ID: EDOC1000174115

Views: 45071

Downloads: 33

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next