No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - QoS

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling the SA Statistics Function on an Interface

Enabling the SA Statistics Function on an Interface

Context

To enable SAC identification for incoming traffic on an interface, you must enable the SA statistics function on the interface where the application is to be identified so that the SAC application configuration takes effect. Otherwise, the application cannot be identified.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run interface interface-type interface-number

    The interface view is displayed.

  3. Run sa application-statistic enable

    The SA statistics function is enabled on the interface.

    By default, the SA statistics function is disabled on an interface.

Translation
Download
Updated: 2019-12-27

Document ID: EDOC1000174115

Views: 45404

Downloads: 34

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next