Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
What Are Differences Between the Outbound Traffic Policing and Traffic Shaping?
Both outbound traffic policing (TP) and traffic shaping (TS) limit the rate of outgoing traffic on an interface. Traffic policing and traffic shaping have the following differences:
Traffic policing directly discards packets with rates that are greater than the traffic policing rate. Traffic shaping, however, buffers packets with rates that are greater than the traffic shaping rate and sends the buffered packets at an even rate.
Traffic shaping increases the delay, whereas traffic policing does not.
Previous
