No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - QoS

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Application Scenarios for Traffic Statistics

Application Scenarios for Traffic Statistics

Traffic Statistics

As shown in Figure 9-1, the MAC address of PC1 is 0000-0000-0003 and PC1 is connected to the WAN-side network device through the switch. The router is required to collect statistics on packets with the source MAC address 0000-0000-0003.

Figure 9-1  Networking of traffic statistics

Service Deployment

  • Configure a traffic classifier to match packets with the source MAC address of 0000-0000-0003 so that the device differentiates packets of PC1.
  • Configure a traffic behavior and define traffic statistics in the traffic behavior.
  • Configure a traffic policy, bind the traffic classifier and traffic behavior to the traffic policy, and apply the traffic policy to the inbound direction of the router so that the device collects statistics on packets of PC1.
Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000174115

Views: 39658

Downloads: 28

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next