No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - QoS

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a Traffic Policy

Configuring a Traffic Policy

Pre-configuration Tasks

Before configuring a traffic policy, complete the following tasks:

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run traffic policy policy-name

    A traffic policy is created and the traffic policy view is displayed, or the view of an existing traffic policy is displayed.

    By default, no traffic policy is created in the system.

  3. Run classifier classifier-name behavior behavior-name [ precedence precedence-value ]

    A traffic behavior is bound to a traffic classifier in a traffic policy.

    By default, no traffic classifier or traffic behavior is bound to a traffic policy.

  4. Run quit

    Exit from the traffic policy view.

  5. Run quit

    Exit from the system view.

Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000174115

Views: 42377

Downloads: 30

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next