No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - QoS

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing Traffic Statistics

Clearing Traffic Statistics


The cleared flow-based traffic statistics cannot be restored. Exercise caution when you run the reset command.


  • Run the reset traffic policy statistics interface interface-type interface-number [ pvc vpi-number/vci-number | dlci dlic-number ] { inbound | outbound } or reset traffic policy statistics interface virtual-template vt-number virtual-access va-number { inbound | outbound } command to clear statistics on packets matching a traffic policy on an interface.
  • Run the reset qos queue statistics interface interface-type interface-number [ queue queue-index ] or reset qos queue statistics interface { virtual-template vt-number virtual-access va-number } [ queue queue-index ] command to clear traffic statistics in a queue on an interface.
Updated: 2019-05-17

Document ID: EDOC1000174115

Views: 39660

Downloads: 28

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next