No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - QoS

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Is the Bandwidth Calculated in the AF and EF Queues on a Tunnel Interface?

How Is the Bandwidth Calculated in the AF and EF Queues on a Tunnel Interface?

The tunnel interface is a virtual interface that cannot sense the bandwidth on the physical interface. Therefore, the following requirements are specified:
  • If the qos gts command is not executed on the tunnel interface, the available bandwidth is 1 Gbit/s.
  • If the qos gts command has been executed on the interface, the available bandwidth is the value of cir.
Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000174115

Views: 41922

Downloads: 30

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next