No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - QoS

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the MQC Configuration

Verifying the MQC Configuration

Procedure

  • Run the display traffic classifier user-defined [ classifier-name ] command to check the traffic classifier configuration.
  • Run the display traffic behavior { system-defined | user-defined } [ behavior-name ] command to check the traffic behavior configuration.
  • Run the display traffic policy user-defined [ policy-name [ classifier classifier-name ] ] command to check the traffic policy configuration.

  • Run the display traffic-policy applied-record [ policy-name ] command to check the application record of a specified traffic policy.

Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000174115

Views: 41685

Downloads: 28

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next