No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - QoS

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Are There Any Requirements for Weights Assigned to Queues for WFQ Scheduling, and Do I Have to Ensure That the Sum of All Weights Is 100?

Are There Any Requirements for Weights Assigned to Queues for WFQ Scheduling, and Do I Have to Ensure That the Sum of All Weights Is 100?

In weighted fair queuing (WFQ) scheduling, the value of the weight for each queue is 1–100. Generally, the sum of all weights is set to 100 to facilitate calculation. However, this is not mandatory.

The bandwidth ratio occupied by each queue = the weight of the queue/the sum of all weights.

For example: If the current interface has four queues, and the weights are 10, 10, 10, and 50 respectively, the bandwidth ratio is 10/80 when the weight value of the queue is 10, and the bandwidth ratio is 50/80 when the queue's weight value is 50.

Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000174115

Views: 40648

Downloads: 28

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next