No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - QoS

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Restoring the Version

Restoring the Version

Context

If an exception occurs during the update of the signature database, you can restore the signature database to the factory default version and perform the update again.

If the signature database is restored to the factory default version, all other versions on the Router are deleted. Perform the operation with caution.

Procedure

  1. Run system-view

    Access the system view.

  2. Run update restore sdb-default sa-sdb

    Restore the signature database to the factory default version.

Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000174115

Views: 40253

Downloads: 28

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next