No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - QoS

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring an Interface Priority

(Optional) Configuring an Interface Priority

Context

An interface's priority is used in the following scenarios:
  • When the interface receives untagged VLAN packets, the device forwards the packets based on the interface priority.
  • If the interface is configured to trust 802.1p priorities, the device uses the interface priority as the 802.1p priority for the untagged packets received on the interface, and then searches the 802.1p priority mapping table to determine the queue for the untagged packets.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run interface interface-type interface-number

    The interface view is displayed.

  3. Run port priority priority-value

    The interface priority is set.

    By default, the interface priority is 0.

Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000174115

Views: 40598

Downloads: 28

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next