No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - QoS

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Traffic Shaping

Configuring Traffic Shaping

Pre-configuration Tasks

Traffic shaping enables the device to send outgoing traffic at an even rate and reduces the number of discarded packets that exceed the CIR.

Before configuring traffic shaping on an interface, configure link layer attributes of the interface to ensure that the interface works properly.

Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000174115

Views: 39499

Downloads: 28

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next