No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - QoS

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Application Scenarios for Packet Filtering

Application Scenarios for Packet Filtering

Packet filtering allows the device to only permit trusted packets to pass through. The device discards any untrusted packets. This function improves network security and allows flexible network planning.

As shown in Figure 7-1, packets of different services are identified by 802.1p priorities on the LAN. When packets reach the WAN, it is required that data packets be filtered and voice and video services be ensured.

Figure 7-1  Networking of packet filtering

Updated: 2019-05-17

Document ID: EDOC1000174115

Views: 40448

Downloads: 28

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next