No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - QoS

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Configuration

Verifying the Configuration

Prerequisites

The SAC configuration is complete.

Procedure

  • Run the display sa information command to check the SA configuration on the device.
  • Run the display sa category [ category-name ] command to check the configured SA group.
  • Run the display sa application-list command to check the SA protocol list on the device.
  • Run the display application command to check information about applications in the system.
  • Run the display application name aging-time command to check the aging time of the application association table.
Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000174115

Views: 40054

Downloads: 28

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next