No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - QoS

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Application Scenarios for HQoS

Application Scenarios for HQoS

As shown in Figure 6-2, site 1 is the headquarters, and sites 2 and 3 are two departments. The departments and headquarters are connected by two links. Each department has voice, video, and data service flows.

Each department requires the assured bandwidth and can share the maximum bandwidth of an interface. Voice packets need to be sent first and bandwidth needs to be ensured for video and data packets.

Figure 6-2  Deploying HQoS on the WAN-side interface

To meet the preceding requirements, configure HQoS in the outbound direction of the WAN-side interface. Configure traffic policy nesting on the interface. The traffic classifier in the traffic policy differentiates users, that is, user queues. The traffic classifier in the sub traffic policy differentiates services, that is, flow queues. CBQ provides EF queues to send voice packets first and AF queues to ensure bandwidth.

Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000174115

Views: 40145

Downloads: 28

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next