No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - QoS

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Displaying Statistics on ACL-based Packet Filtering

Displaying Statistics on ACL-based Packet Filtering


After ACL-based packet filtering is configured on an interface, you can run the following command to view statistics on forwarded and discarded packets.


  • Run the display traffic-filter statistics interface interface-type interface-number { inbound | outbound } [ verbose rule-base ] or display traffic-filter statistics interface virtual-template vt-number virtual-access va-number { inbound | outbound } [ verbose rule-base ] command to view traffic statistics about ACL-based packet filtering on an interface.
Updated: 2019-05-17

Document ID: EDOC1000174115

Views: 42154

Downloads: 30

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next