No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - Reliability

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the BFD Configuration

Verifying the BFD Configuration


  • Run the display bfd interface [ interface-type interface-number ] command to verify the BFD-enabled interface.
  • Run the display bfd session { all | static | discriminator discr-value | dynamic | peer-ip { default-ip | peer-ip [ vpn-instance vpn-instance-name ] } | static-auto } [ verbose ] command to view information about the BFD session.
  • Run the display bfd statistics command to verify global BFD statistics.
  • Run the display bfd statistics session { all | static | dynamic | discriminator discr-value | peer-ip default-ip | peer-ip peer-ip [ vpn-instance vpn-name ] | static-auto } command to verify BFD session statistics.
Updated: 2019-05-17

Document ID: EDOC1000174116

Views: 59666

Downloads: 21

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next