No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Reliability

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting the RMEP Activation Time

Setting the RMEP Activation Time

The RMEP activation time is the time reserved for configuring the RMEP. The local device starts to receive CCMs at the configured activation time.

Context

Perform the following operations on all edge devices of all MAs.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run cfm md md-name

    The MD view is displayed.

  3. Run ma ma-name

    The MA view is displayed.

  4. Run active time time

    The RMEP activation time is configured.

Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000174116

Views: 59336

Downloads: 21

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next