Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Association Between EFM and CFM
EFM is associated with CFM to report faults to each other.
- Configuring Association Between EFM and CFM
Select the mode in which faults are reported as required. - Verifying the Configuration of Association Between EFM and
CFM
To verify whether the configuration is successful, check whether CFM sends fault alarms to the remote end.
