Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Maintaining AP Statistics
Checking AP Running Statistics
Context
After AP online and management AP configurations are complete, run the following commands in any view to check AP running statistics.
Procedure
- Run the display ap run-info { ap-name ap-name | ap-id ap-id } command to check AP running information.
- Run the display ap performance statistics { ap-name ap-name | ap-id ap-id } command to check AP performance statistics.
- Run the display radio { all | ap-group ap-group-name | ap-name ap-name | ap-id ap-id } command to check AP radio information.
- Run the display ap asyn-message err-info { all | ap-name ap-name | ap-id ap-id } command to check records about AP restart failures.
- Run the display ap uncontrol all command to check unauthorized APs.
- Run the display channel switch-record { all | ap-name ap-name radio radio-id | ap-id ap-id radio radio-id | reason reason } command to check channel switching records.
- Run the display ap traffic statistics wireless { ap-name ap-name | ap-id ap-id } radio radio-id [ ssid ssid ] command to check packet statistics on an AP radio.
- Run the display ap elabel { ap-name ap-name | ap-id ap-id } command to check AP electronic label information.
- Run the display ap service-config acl { ap-name ap-name | ap-id ap-id } command to check ACL configurations on an AP.
- Run the display ap port { all | ap-name ap-name | ap-id ap-id | ap-mac ap-mac } command to check the AP port status and traffic information.
Checking AP Neighbor Information
Context
You can view neighbor information on a specified AP radio to determine the AP location and neighbor relationship, helping locate rogue APs and plan the WLAN.
Procedure
- Run the display ap lldp neighbor { { ap-name ap-name | ap-id ap-id } [ interface interface-type interface-number ] | brief } command to check LLDP neighbor information on an AP.
- Run the display ap neighbor { ap-name ap-name | ap-id ap-id } [ radio radio ] command to check information about neighbors of a radio.
- Run the display ap around-ssid-list { ap-name ap-name | ap-id ap-id } command to check SSIDs of an AP's neighbors.
