Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Licensing Requirements and Limitations for WLAN-AC
Involved Network Elements
AP
- APs mentioned in this document are Huawei AP products. You are advised to use Huawei APs to connect to the AC.
- You can run the display ap-type command to check the default AP types supported by the device.
AAA Server
- Huawei Agile Controller or third-party AAA server, which implements authentication, accounting, and authorization on users.
Portal Server
- Huawei Agile Controller or third-party Portal server, which receives authentication requests from Portal clients. It provides free Portal services and a web authentication GUI, and exchanges authentication information of authentication clients with the access device. This NE is required only when Portal authentication is used.
Licensing Requirements
For the devices that support the WLAN AC feature, the licenses for the WLAN AC feature are as follows:
- The following lists the maximum number of access APs supported on the AR110-S&AR120-S series, AR150-S&AR160-S&AR200-S series, AR1200-S series, AR101-S, AR101W-S and AR101GW-Lc-S serving as an AC:
- AR110-S&AR120-S series, AR101-S, AR101W-S and AR101GW-Lc-S: 4
- AR150-S&AR160-S&AR200-S series: 8
- AR1200-S series: 12
- When no AC license is loaded, the AR2200-S and AR3200-S series serving as ACs can connect to a maximum of four APs. To connect more APs to an AC, apply for and purchase a license from the agent according to the device model:
- AR2200-S series: AR2200 AC Express License
- AR3200-S series: AR3200 AC Express License