Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Applying the STA Blacklist and Whitelist Configuration to an AP System Profile
Context
You can configure multiple STA whitelist and blacklist profiles on the device and apply the profiles to different AP system profiles. In an AP system profile, either the STA whitelist profile or STA blacklist profile takes effect at one time.
Procedure
- Run system-view
The system view is displayed.
- Run wlan ac
The WLAN view is displayed.
- Apply the configuration to make it take effect.
Applying the configuration to an AP system profile.
- Run the ap-system-profile name profile-name command to enter the AP system profile view.
Run the sta-access-mode { blacklist | whitelist } profile-name command to specify whether the STA blacklist or STA whitelist profile takes effect.
By default, no STA blacklist or whitelist profile is bound to an AP system profile.
- Run quit
Return to the WLAN view.
- Run commit { all | ap-name ap-name | ap-id { ap-id1 [ to ap-id2 ] } &<1-10> }
Configurations are delivered to APs.
