Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Applying the Configuration to an AP Group or a Specific AP
Context
WIDS services are implemented on APs, including attacking device detection, and dynamic blacklist; therefore, the WIDS profile carrying the WIDS services must be applied to an AP group or a specific AP.
Procedure
- Run system-view
The system view is displayed.
- Run wlan ac
The WLAN view is displayed.
- Bind a WIDS profile to an AP group or a specific
AP.
- Binding a WIDS profile to an AP group.
- Binding a WIDS profile to a specific AP.
- Run quit
Return to the WLAN view.
- Run commit { all | ap-name ap-name | ap-id { ap-id1 [ to ap-id2 ] } &<1-10> }
Configurations are delivered to APs.
