Managing AP Wired Login

Procedure

1. Run system-view

   The system view is displayed.

2. Run wlan ac

   The WLAN view is displayed.

3. Run ap username username password cipher

   The user name and password for AP login are configured.

   By default, the user name is admin and password is admin@huawei.com.

4. Run ap-system-profile name profile-name

   An AP system profile is created, and the AP system profile view is displayed.

   By default, the system provides the AP system profile default.

5. Run undo stelnet server disable

   The STelnet service function is enabled.

   By default, the STelnet server function is enabled on an AP.

6. (Optional) Run undo console disable

   AP login through the console port is enabled.

   By default, a user can log in to the AP through a console interface.

7. (Optional) Run undo sftp server disable

   The SFTP service function is enabled.

   By default, the SFTP server function is enabled on an AP.

8. (Optional) Run telnet enable

   The Telnet service function is enabled.

   By default, Telnet is disabled on an AP.

9. Run quit

   Return to the WLAN view.

10. Bind an AP system profile to an AP group or AP.
    • Binding an AP system profile to an AP group.
      1. Run the ap-group name group-name command to enter the AP group view.

      2. Run the ap-system-profile profile-name command to bind the AP system profile to the AP group.

         By default, the AP system profile default is bound to an AP group.

    • Binding an AP system profile to an AP.
      1. Run the ap-id ap-id, ap-mac ap-mac, or ap-name ap-name command to enter the AP view.

      2. Run the ap-system-profile profile-name command to bind the AP system profile to the AP.

         By default, no AP system profile is bound to an AP.

11. Run quit

    Return to the WLAN view.

12. Run commit { all | ap-name ap-name | ap-id { ap-id1 [ to ap-id2 ] } &<1-10> }

    Configurations are delivered to APs.