Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring APs to Go Online
To enable APs to discover an AC and go online on the AC after passing security authentication, you need to configure network elements (NEs), interconnections between NEs, and AC system parameters.
Pre-configuration Tasks
Before configuring APs to go online, perform the task of CLI Login Configuration.
Procedure
Perform the following steps in the listed order.
