Configuring Interference Detection
Context
- Co-channel interference: WLAN_1.3.6.1.4.1.2011.6.139.16.1.1.1.5 hwAPCoInterfDetectedTrap
- Adjacent-channel interference: WLAN_1.3.6.1.4.1.2011.6.139.16.1.1.1.7 hwNerborInterfDetectedTrap
- STA interference: WLAN_1.3.6.1.4.1.2011.6.139.16.1.1.1.9 hwStaInterfDetectedTrap
Pre-configuration Tasks
Before configuring interference detection, perform the task of Configuring Basic WLAN Services.
Procedure
- Run system-view
The system view is displayed.
- Run wlan ac
The WLAN view is displayed.
- Run radio-2g-profile name profile-name or radio-5g-profile name profile-name
The 2G or 5G radio profile view is displayed.
- Run interference detect-enable
The interference detection function is enabled.
By default, the interference detection function is disabled.
- (Optional) Configure interference detection thresholds.
Run the interference co-channel threshold threshold-value command to configure the alarm threshold for co-channel interference.
By default, the alarm threshold for co-channel interference is 50%.
Run the interference adjacent-channel threshold threshold-value command to configure the alarm threshold for adjacent-channel interference.
By default, the alarm threshold for adjacent-channel interference is 50%.
Run the interference station threshold threshold-value command to configure the alarm threshold for STA interference.
By default, the alarm threshold for STA interference is 32.
- Run quit
Return to the WLAN view.
- Bind the radio profile to an AP group or a specific AP. For the detailed procedure, see Binding a Radio Profile.
- Run quit
Return to the WLAN view.
- Run commit { all | ap-name ap-name | ap-id { ap-id1 [ to ap-id2 ] } &<1-10> }
Configurations are delivered to APs.
