Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing WLAN Security Information
Context
After the WLAN security configuration is complete, check the configuration results. If the configuration results are unnecessary or you need to re-collect the configuration results, clear the existing configuration results.
Procedure
- Run the reset wlan ids attack-detected { all | flood | spoof | wapi-psk | weak-iv | wep-share-key | wpa-psk | wpa2-psk | mac-address mac-address } command to clear information about the detected attacking devices.
- Run the reset wlan ids attack-detected statistics command to clear statistics on the detected attacks.
- Run the reset wlan ids attack-history { all | flood | spoof | wapi-psk | weak-iv | wep-share-key | wpa-psk | wpa2-psk | mac-address mac-address } command to clear historical records of the detected attacking devices.
- Run the reset wlan ids dynamic-blacklist { ap-id ap-id | ap-name ap-name | mac-address mac-address | all } command to clear information in the dynamic blacklist.
