About This Document
Purpose
This document describes the underlying management software Hyper Management Module (HMM).
After reading this document, you can learn about the HMM functional modules, functions provided by each module, relationships between the modules, and all operation commands used on the HMM.
Intended Audience
This document is intended for:
- Server installation engineers
- Server maintenance engineers
![]()
NOTE: This document describes commands for network deployment and maintenance of Huawei servers.
This document does not include the commands for production, assembly, or detection of returned or repaired parts.
Incorrect use of the commands for engineering or fault location may cause device exceptions or service interruption. Contact Huawei technical support if you need to use these commands.
Only the professional or qualified personnel who can identify dangers in the server field can run the commands described in this document.
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol Conventions
Symbol |
Description |
|---|---|
|
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. |
|
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. |
|
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. |
|
Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results. NOTICE is used to address practices not related to personal injury. |
|
Calls attention to important information, best practices and tips. NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration. |
Change History
Issue |
Date |
Description |
|---|---|---|
06 |
2018-10-31 |
Updated Querying PCIe Topology Configurations (composition). |
05 |
2018-07-25 |
Updated About This Document. |
04 |
2018-03-08 |
Added Optical Module Commands. |
03 |
2018-01-24 |
Modified PCIe Topology Orchestrating Commands. |
02 |
2017-12-07 |
Added ssh command description. |
01 |
2017-11-06 |
This issue is the first official release. |
Previous
