No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionStorage V100R006C10 Block Storage Service Parts Replacement 06

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Placing a Storage Node into Maintenance Mode

Placing a Storage Node into Maintenance Mode

Scenario

On the FusionStorage Block Self-Maintenance Platform, place a storage node into maintenance mode.

This operation can be performed during parts replacement. If a node becomes faulty, the system automatically removes it from the storage pool after 30 minutes by default. This duration is prolonged to 75 minutes if the faulty node has been placed into maintenance mode.

Prerequisites

You have logged in to the FusionStorage Block Self-Maintenance Platform.

Procedure

    1. On the FusionStorage Block Self-Maintenance Platform, choose Hardware > Servers.

      The Servers page is displayed.

    2. Click to the left of the target server and select Set Maintenance Mode.

      A dialog box is displayed.

    3. Click Yes.
Translation
Download
Updated: 2019-02-01

Document ID: EDOC1000175242

Views: 11327

Downloads: 1

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next