No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionStorage V100R006C10 File Storage Service Software Installation Guide 06

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Preparing the Installation Tools

Preparing the Installation Tools

This section describes how to prepare required tools during the installation.

Table 3-3 lists the software and hardware tools required during the installation.

Table 3-3  Tools for the installation



One network cable

Used to connect an installation PC to a storage node or switch.

(Optional) One VGA cable, mouse, keyboard, and display

If the KVM is unavailable, the display can connect to a storage node through the VGA cable.

One console serial cable

Used to connect the switches. One end of this cable is an RJ-45 connector and the other end is a DB-9 connector (connecting to the installation PC). If the installation PC has no serial port, prepare a USB-to-serial port cable.

Updated: 2019-03-28

Document ID: EDOC1000175257

Views: 9341

Downloads: 3

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next