No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionStorage V100R006C10 File Storage Service Software Installation Guide 06

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Remotely Logging In to the iBMC Management Page of a Storage Node Through the Mgmt Port

Remotely Logging In to the iBMC Management Page of a Storage Node Through the Mgmt Port


The Mgmt IP address of a storage node has been configured by default, and can be re-configured if necessary. For details about how to configure it, see chapter Configuring an IP Address for the Mgmt Port of a Storage Node in this appendix. The Layer-3 network between the installation PC and the Mgmt port on the storage node is normal.


  1. On the web browser of the PC, enter the IP address of the Mgmt port or enter https://IPv4 (such as or https://[IPv6] (such as xxx) to log in to the iBMC management page.

    • This login method allows a maximum of four users to log in to iBMC simultaneously.
    • If you type an incorrect password for five consecutive times, the system locks your account. You can wait for 5 minutes and try login again, or ask the administrator for help to use commands to unlock your account.
    • If you use Internet Explorer to log in to iBMC for the first time after the browser is upgraded, a messaging stating that your account or password is incorrect may be displayed. In this case, press Ctrl+Shift+DEL and click Delete in the displayed dialog box. The cache of your browser is cleared. Then, try login again.

    • If iBMC fails to be logged in to using Internet Explorer, choose Tools > Internet options > Advanced and click Reset. Then, try login again.

  2. Ignore the warning information.

    The Internet Explorer is used as an example. As you are prompted with "There is a problem with this website's security certificate", click Continue to this website (not recommended), and the login page is shown in Figure 8-5.

    Figure 8-5  iBMC login page

  3. Enter the user name and password and click Log In.

    The default user name and password are root and Huawei12#$ respectively.

    To reduce security risks, you must change the default password of each account on all storage nodes before the system is put into use, and change the passwords periodically.

Updated: 2019-03-28

Document ID: EDOC1000175257

Views: 8806

Downloads: 3

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next