No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

ME60 Troubleshooting Guide V1.0 (VRPv8)

This document provides the maintenance guide of the device, including daily maintenance, emergence maintenance, and typical troubleshooting.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Command Executions Involving Risks

Command Executions Involving Risks

The commands given below can be used only by the qualified and trained personnel.

Table 2-4 Command executions involving risks

Classification

Command

Function

Aftereffect that may be caused by maloperation

Reboot

reboot

Rebooting the system

This command can be used only in the case of office deployment or upgrading; otherwise, the services carried over the device will be interrupted.

Delete

delete [ unreserved ] filename

Deleting the specified files in the storage device

This command is used to delete the specified files in the storage device of the router. If you use unreserved when deleting files, the files cannot be restored.

User interface

authentication-mode

Authenticating the logon users

When setting user authentication on the Console and VTY user interface, if the mode is password or AAA, you have to set the password or the user name to log on to the router.

System maintenance

startup system-software

Setting the large file for next startup

In the active/standby mode, set the large files for next startup at the same time on the active and standby main control board. Otherwise, the router will restart continuously.

System maintenance

upgrade all-slot, upgrade lpu, upgrade mpu,

Upgrading a board

Using this command to upgrade the software or the logical file of a board will interrupt the services.

System maintenance

power off

Powering off a board

Using this command will power off a board and interrupt the services.

System maintenance

reset slot

Restarting a board

Using this command will restart the specified board.

System maintenance

reset saved-configuration

Clearing information about the configuration files on the storage device

Using this command will clear information about the configuration files on the storage device.

Translation
Download
Updated: 2019-06-11

Document ID: EDOC1000175918

Views: 11953

Downloads: 243

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next