No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


ME60 Troubleshooting Guide V2.0 (VRPv8)

This document provides the maintenance guide of the device, including daily maintenance, emergence maintenance, and typical troubleshooting.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
DSVPN Troubleshooting

DSVPN Troubleshooting

This chapter describes common causes of DSVPN faults and provides the corresponding troubleshooting flowcharts, troubleshooting procedures, alarms, and logs.

Maintaining DSVPN

DSVPN maintenance includes: Clears statistics and monitoring configuration information.

Clearing DSVPN Running Statistics


Statistics cannot be restored after being cleared. Exercise caution when you run the command.


  • Run the reset nhrp statistics interface tunnel interface-number, command in the user view to clear NHRP packet statistics on a specified tunnel interface.
  • Run the reset nhrp peer { all | interface tunnel interface-number } command in the user view to clear historical statistics on NHRP peer entries.

Monitoring DSVPN Running Statistics


All DSVPN configurations have been completed.


  • Run the display nhrp statistics interface tunnel interface-number, command to check NHRP packet statistics.
Updated: 2019-11-20

Document ID: EDOC1000175918

Views: 26905

Downloads: 292

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next