No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R008C00 CLI-based Configuration Guide

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a Management VLAN on an AP

Configuring a Management VLAN on an AP

Context

Generally, the PVID of the access device interface to which an AP directly connects is configured as the management VLAN ID. For details, see Configuration Precautions. Management packets sent by the AP are then transmitted on CAPWAP tunnels. When the packets arrive at the access device, the access device adds the PVID to the packets as their VLAN tags.

Procedure

  1. Run:

    system-view

    The system view is displayed.

  2. Run:

    management-vlan vlan-id

    A management VLAN is configured for an AP.

    By default, no management VLAN is configured for an RU.

    NOTE:

    Ensure that the PVID of the interface on the access device directly connected to the RU is the management VLAN ID. Otherwise, the RU cannot go online.

Translation
Download
Updated: 2019-01-11

Document ID: EDOC1000176006

Views: 117451

Downloads: 309

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next