No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R008C00 CLI-based Configuration Guide

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Creating an AP Group

Creating an AP Group


On a central AP + RU network, one central AP manages many RUs. Usually, you need to perform the same configurations on the RUs. In this situation, you can add the RUs to an AP group and perform configurations uniformly in the AP group, which simplifies operations. All RUs in the group use the same configurations.

Each RU must and can only join one AP group. An AP group contains configurations shared by all RUs. You can configure configurations specific to a single RU in the AP view.

By default, an RU automatically joins the AP group default. The AP group default cannot be deleted, but you can modify configurations in the default AP group.

By default, an AP group has the following profiles bound: AP system profile default, 2G radio profile default, 5G radio profile default, regulatory domain profile default, WIDS profile default, and AP wired port profile default.

Pre-configuration Tasks

Before creating an AP group, configure user login.


  1. Run:


    The system view is displayed.

  2. Run:


    The WLAN view is displayed.

  3. Run:

    ap-group name group-name

    An AP group is created, and the AP group view is displayed.

    By default, the system provides the AP group default.

Checking the Configuration

  • Run the display ap-group { all | name group-name } command to view AP group configurations.

Follow-up Procedure

After an AP group is created, you need to add RUs to the AP group so that the RUs can use configurations in the group. For details, see Adding RUs.

Updated: 2019-01-11

Document ID: EDOC1000176006

Views: 129033

Downloads: 311

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next